T32 팁 메모
2011/03/07
// 커멘트는 가급적 // 으로
area.create log
area.select log
;area.reset
area log
area.open log log.txt ; close 해야 저장
; area.close log
start:
step
screen
wait 100.ms ; 1.s 도 가능
print "pc=" register(pc)
print "gpio=" data.word(d:0x0)
v.print "flags=" flags
goto start
printer.filetype ascii
// printer.open trace.txt
printer.file trace.txt
start:
go
wait 100.ms
break
screen
goto start
// data.save.b a.bin 0x0--0xfffff
printer.filetype ascii
printer.open trace.txt // close 해야
// printer.file trace.txt
start:
go
wait 100.ms
break
screen
wp.d.l
wp.v.f /l /c
wp.r
goto start
// data.save.b a.bin 0x0--0xfffff
// data.list
go func*
step.till r(r0)==3
go.change210.221.221.242
posted by dawnsea on 2005.10.13-11:27 / delete
var.break.set
break.set
break.list
--> hll 체크하고 sunny[3] 의 sunny 만 지정하면 배열 전체가 레인지로 잡힌다.210.221.221.242
posted by dawnsea on 2005.10.13-01:11 / delete
hll -> 전체에 걸린다210.221.221.242
posted by dawnsea on 2005.10.13-01:14 / delete
레인지 직접 지정 가능.
r(r1)==3&&data.word(d:sunny+3)
var.watch
local &i=0.
repeat 100.
(
&i=&i+1.
go again
wait !run()
print &i
)
[t:/] is not "technology - root". dawnsea, rss